Home FortiGate Firewall FortiGate 7060E Chasis Firewall
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis. The FIM modules
include an integrated switch fabric and DP2 processors to load balance millions of data sessions over the chassis
fabric backplane to FPM processor modules. The following FIM modules are available
The FIM-7901E includes thirty-two front panel 10GigE SFP+ fabric channel interfaces (A1 to A32). These interfaces are connected to 10Gbps networks. These interfaces can also be configured to operate as Gigabit Ethernet
interfaces using SFP transceivers.
The FIM-7904E includes eight front panel 40GigE QSFP+ fabric channel interfaces (B1 to B8). These interfaces are
connected to 40Gbps networks. Using 40GBASE-SR4 multimode QSFP+ transceivers, each QSFP+ interface can
also be split into four 10GBASE-SR interfaces and connected to 10Gbps networks.
The FIM-7910E (shown in FIM modules on page 6) includes four front panel 100GigE CFP2 fabric channel
interfaces (C1 to C4). These interfaces can be connected to 100Gbps networks. Using 100GBASE-SR10 multimode
CFP2 transceivers, each CFP2 interface can also be split into ten 10GBASE-SR interfaces and connected to 10Gbps networks.
The FIM-7920E includes four front panel 100GigE QSFP28 fabric channel interfaces (C1 to C4). These interfaces can be connected to 100Gbps networks. Using a 100GBASE-SR4 QSFP28 or 40GBASE-SR4 QSFP+ transceiver, each QSFP28 interface can also be split into four 10GBASE-SR interfaces and connected to 10Gbps networks
Brand:Asus
Model ID:UX533FD A9094T
Processor:Intel i7-8565U
Ram:16GB
Hard Disk Drive:1TB PCIE G3x4
Graphics : GTX1050 2G
Camera spec:CMOS Camera ,IR+RGB
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Brand:Asus
Model ID:S530UN BQ373T
Processor:Intel I5-8250U
Ram: 8 GB DDR4
Graphics: MX150 2GB DDR5
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
6th/7th Gen Intel Celeron Processor
4GB RAM Support Dual Channel DDR4 2133/ 1866 MHz,2 x DDR4 DIMM Memory Slot, Max. Supports up to 32GB Memory
500GB HDD, 4 x SATA3 Connector
19.5inch LED monitor
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Overview:
The mobilization of workforce has led to demand for anytime-anywhere access to network resources.
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Brightness-5500/6500 lm
Conntrast Radio-00:1
Resolution-WUXGA(1920*1200)
Input-HDMI,DVI-D,VGA,LAN,Rs232,Audio In & Out,HD Base T
Weight-16kg
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Model Number : ZE500KL
Processor : Octa Core, 1.2 GHz
Display : 5 inch, 720 x 1080 px
Memory : 2GB RAM, 16GB inbuilt
Camera : 13 MP Rear + 5 MP Front Camera
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Intel Core i5 7400T Processor
8GB Up to 32GB Memory
DDR4 at 2400MHz
512GB SSD 1TB Hard Drive
Windows 10 Pro ASUS recommends Windows 10 Pro. Operating System
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Processor :i5-1035G1
Operating System: windows 10
Memory :8GB
Hard Drive :1Tb
ODD : No DVD
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Processor:Intel Ryzen 5 3500U Processor
Memory:8GB DDR4 Ram
Operating Systems:Windows 10 Home OS
Hard disk:1TB HDD
Display:15.6 inch FHD Display
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Model No: B9450FA BM0695T
Intel Core i7 10510U Processor
16GB LDDR3 RAM Memory
1TB PClex4 SSD Hard Disk
Windows 10 Home Operating System
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
The Cisco Nexus 93360YC-FX2 Leaf Switch is a 2-Rack-Unit (2RU) Leaf switch that supports 7.2 Tbps of bandwidth and 2.8 bpps across 96 fixed 10/25G SFP+ ports and 12 fixed 40/10G QSFP28 ports. The 96 ports of downlinks support 1/10/25-Gbps. The 12 uplinks ports can be configured as 40- and 100-Gbps ports, offering flexible migration options. The switch is ideal for a non-oversubscribed solution in a compact form factor. The switch has FC-FEC and RS-FEC enabled for 25Gbps support over longer distances.
Main Features
FX2
Switch
L3
managed
96 x 1/10/25 Gigabit SFP+ + 12 x 40/100 Gigabit QSFP28
rack-mountable
Built-in Devices :128 GB SSD
Installed Size :16 GB
Capacity :SPAN sessions: 4, Port channels: 512, VLANs supported: 3967, NAT entries: 1023, HSRP groups: 490, Longest prefix match (LPM) routes: 896000, Multicast routes: 32000, ACL entries (ingress): 5000, MST instances: 64, ECMP paths: 64, IP host entries: 896000, ACL entries (egress): 2000, MAC addresses: 256000, Rapid Per-VLAN Spanning Tree Plus instances: 3967
Form Factor :Rack-mountable
Ports Qty :96
Advanced Switching :Layer 3
Routing Protocol :ECMP, RSVP, BGP, PIM-SM, MSDP, OSPF, EIGRP, RIP, RIP-2, Multiprotocol BGP, HSRP, MPLS
Manageable :Yes
Status Indicators :Status
Features :Layer 3 switching, Open Shortest Path First (OSPF), 3 fans, Port-side exhaust (PSE), Multicast Source Discovery Protocol (MSDP), MPLS support, Virtual Extensible LAN (VXLAN), MACsec support, Source-Specific Multicast (SSM), Access Control List (ACL) support, Virtual PortChannel (vPC) technology, 40MB system buffer, Spanning Tree Protocol (STP) support, Power On Auto Provisioning (POAP), Ethernet Virtual Private Network (EVPN), Multiple Spanning Tree Protocol (MSTP) support
Interfaces :1 x management SFP+, 12 x 100Gbit/40Gbit LAN QSFP28, 96 x 1/10/25Gbit LAN SFP+, 1 x serial (RS-232), 1 x USB, 1 x management RJ-45
Ports Type :40/100 Gigabit QSFP28
Dimensions & Weight
Width :17.4 inch
Depth :22.9 inch
Height :3.4 inch
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Intel i5-7200U Processor
4GB DDR4 Memory
1TB Hard Disk
DOS Operating System
Blue color
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Brand Name : NETGEAR
Series : NETGEAR
Item model number : GSM4352PB-100NES
Item Weight : 20 pounds
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Brand:Asus
Model ID:P1440FA FQ0537R
Processor:Intel i5-8265U
Ram:4GB Ram
Hard Disk Drive:1TB
Operating System:Windows 10 Pro
Display:14HD Display
Features:No ODD , AC ,BT4.1,Figner print ,TPM ,bag
Warranty:3y OSS warranty
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Model Number : ZB552KL
Processor : Quad Core, 1.2GHz
Memory: 2GB RAM, 16 GB inbuilt
Display : 5.5 inches, 720 x 1280 px
Camera : 13 MP Rear + 5 MP Front Camera
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Processor : R5-5500U
Operating System: no
Memory :8GB
Hard Drive : 512G PCIe SSD
ODD : No DVD
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Brand:Asus
Colour:Gold
Item Weight:5 Kg
Package Dimensions:48.8 x 30.8 x 6.4 cm
Batteries:1 Lithium Polymer batteries required. (included)
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
CPU : Intel Socket 1151 for 8th Generation Core Processors
Chipset : Intel Z370
Memory : 4 x DIMM, Max. 64GB, DDR4
Graphic : Integrated Graphics Processor- Intel HD Graphics support
Storage : Intel Z370 Chipset LAN
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.
Category: Single function Colour
Model no: L130
Paper size: A4
Black ppm (Draft)/ ipm (ISO): 27 / 7.0
Colour ppm (Draft)/ ipm (ISO): 15/3.5
Print Resolution: 5760x1440
Warranty: 1 Year Warranty
Product Description :
FIM modules
FIM modules are hot swappable interface modules that provide data and management interfaces, base
backplane switching and fabric backplane session-aware load balancing for the chassis.